|
|
|
|
FR-10 PRO ESC - LCD Program Card
Designed specifically for the Fantom FR-10 PRO electronic speed control. Use as a stand-alone device to set the parameters of the FR-10 PRO ESC. Use with a PC to update the firmware of the FR-10 PRO ESC and/or to set the parameters of the FR-10 PRO ESC on a PC. Includes all required cables.
SPECIFICATIONS: Dimensions: 91mm x 54mm x 18mm (L/W/H) Weight: 68g Power Supply: DC 5.0V~12.0V
PROGRAMMABLE PARAMETERS:
GENERAL: RUNNNING MODE - Forward/Brake, Forward/Brake/Reverse, Forward/Reverse LOW VOLTAGE CUTOFF - Disable, Auto, custom 3.0v to 11.1v (0.1v increments) ESC OVER-HEAT PROTECTION - Disable, 3 steps MOTOR ROTATION - Normal, Reverse RACE MODE - Stock (Blinky), Modified DEADBAND - 12 steps BEC OUTPUT - 6v, 7.4v
THROTTLE: INITIAL POWER LIMITER - 30 steps THROTTLE RATE - 30 steps DRIVE FREQUENCY - 1K, 2K, 4K, 8K, 16K RPM LOCK - 1% to 100% (1% increments) THROTTLE CURVE - Linear, Custom
BRAKE: INITIAL BRAKE - 1% to 20% (1% increments) DRAG BRAKE - 0% to 100% (1% increments) BRAKE FORCE - 0% to 100% (12.5% increments) INITIAL BRAKE RESPONSE - 20 steps BRAKE RATE - 20 steps BRAKE FREQUENCY - 1K, 2K, 4K, 8K, 16K BRAKE CURVE - Linear, Custom OFF BY RADIO - Yes, No
BOOST: BOOST TIMING - 0° to 64° (1° increments) BOOST TRIGGER LEVEL - 50 steps BOOST TRIGGER RATE - 10 steps
TURBO: TURBO TIMING - 0° to 64° (1° increments) START RPM - 8,000 RPM to 50,000 RPM (1000 RPM increments) TURBO DELAY - Instant, 0.05 seconds to 1 second (.05 second increments) ACTIVATION METHOD - Full Throttle, RPM, Full Throttle + RPM TURBO ON RATE - 10 steps TURBO OFF RATE - Instant, 10 steps
DATA: MINIMUM BATTERY VOLTAGE MAX ESC TEMP MAX MOTOR RPM
|
|
|
|
|
|
|