Multifunction LCD Professional Program Box
This multifunction program box is for programming HobbyWing brushless ESCs. Its friendly LCD interface makes ESC programming easy and quick. With a PC, you can upgrade ESC firmware and further adjust ESC parameters online. Besides, it’s compact, portable and very applicable for field use.
This multifunciton LCD program box is applicable for the following HobbyWing products:
Platinum series of brushless aircraft ESCs, XeRun series &EzRun series of brushless car ESCs, Seaking Pro series of brushless boat ESCs
Working Modes:
1 Works as an individual device to set the ESC, the value of each parameter is displayed on the LCD screen.
2 Works as an USB adapter to link the ESC with a PC to update the
firmware of the ESC or set the ESC by HOBBYWING USB LINK SOFTWARE .
3 Works as a Lipo battery voltmeter to measure the voltage of the whole battery pack or each cell.
4 Uses MCU (microprocessor) with larger memory
Specifications:
1 Size: 90mm (L) * 51mm (W) * 17mm (H)
2 Weight: 65g
3 Input Voltage: 4.5-12.6V
(If the ESC has no built-in BEC, you must use an additional battery pack to power the program box)
4 Display: 16*2 characters LCD.
5 Interface: Mini USB interface, ESC interface (Futaba plug), Power supply interface (Futaba plug)
Programmable Items:
1 Running Mode
2 Drag Brake Force
3 Low Voltage Cut-Off Threshold
4 Start Mode
5 Maximum Brake Force
6 Maximum Reverse Force
7 Initial Brake Force
8 Throttle Neutral Range
9 Timing
10 Over-Heat Protection
11 Motor Rotation
12 Lipo Cells
Note:
USB C Software works for PC users ONLY.
