 |
 |
 |
|
This is the 2.4GHz Radio Controlled, Brushless Powered 1/10th scale Ready-to-Run Senton 6S BLX Short Course Truck from Arrma.
New Larger Battery Tray with Wire Routing Clip and area for Balance Plug
Radio Box with Rubber Wire Seals and Receiver Plate
Larger Diameter 0.16" (4mm) Shock Caps and New High Spring Perches
Additional Webbing Added to Bulkheads for Greater Strength
Stronger Servo Mount for Better Steering Feel
Updated Chassis Braces Attach Directly to Chassis
Lightweight Plastic Shock and Roll Bar Pivot Balls
Added Material Around Front Suspension Arms for Greater Strength
Features: Chassis: 0.12" (3mm) thick aluminum, with side impact bumpers
Drive: Four wheel with CVD driveshafts
Radio: Tactic TTX300 3-channel with user programmable 3rd channel, steering rate adjustment, steering and throttle trim & end point adjustments, 3-channel TR326 high voltage (7.4V) micro receiver with failsafe, 70/30 throttle setting
Steering Servo: ADS-15M metal geared with 208 oz/in torque, .12 sec @ 60° transit speed
Motor: 2050kV brushless with 12T pinion gear
ESC: Arrma BLX185 150A
Shocks: Aluminum body, oil filled, big bore, plastic top and bottom caps and preload adjusters
Shock Towers: 0.20" (5mm) thick aluminum
Suspension: Reinforced hangers with inboard hinge pins that are less likely to pop out
Body: Trimmed and painted
Motor Mount: Aluminum
Gearboxes: Fully sealed
Tires: dboots Sidewinder 2, 1.7" (44mm) wide, 4.2" (108mm) diameter 2.2"/3" mounting bead
Rims: Plastic construction, black in color, 2.2" (56mm) outer diameter, 1.6" (41.5mm) wide, 17mm hex
Pinion Gear: Steel construction 12T Mod 1
Camber: Adjustable front and rear, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Includes:
RTR Senton 6S BLX Short Course Truck with 2.4GHz Radio
Brushless Motor
BLX185 150A Electronic Speed Control
Painted Body
Instruction Manual
Requires:
AA Batteries: Four for transmitter
LiPo Battery: Two 2-3S 5000mAh 35C minimum LiPo with XT90 connector, Onyx 11.1V 5000mAh 35C batteries recommended, or one 4-6S LiPo battery
Battery Charger: To match selected battery
LiPo charging sack, building and track equipment
Senton Specs:
Length: 22" (560mm)
Width: 11.6" (295mm)
Height: 7.67" (195mm)
Wheelbase: 12.5-12.67" (318-322mm)
Weight: 127oz (3.6kg)
Final Gear Ratio: 11.79
Pinion and Spur Gear Pitch: 1M
Maximum Battery Dimensions: 6.22 x 2.76 x 1.89" (158 x 70 x 48mm)
Body Length: 21.7" (552mm)
Body Width: 9.5" (242mm) behind front rims, narrowest point. 12.4" (315mm) at rear rims, widest point
Height 5.5" (140mm)
|
|
|
 |
|
 |
|
