HACKER SAFE certified sites prevent over 99% of hacker crime.

  Home > Electronics > Speed controls > Brushless >

Castle Creations Mamba Micro X Waterproof 1/18th ESC with 4100Kv motor
Castle Creations Mamba Micro X Waterproof 1/18th ESC with 4100Kv motor
Our Price: $101.95

Quantity in Stock:(Out of Stock)

Product Code: CSE010-0147-01

The Mamba Micro X puts Extreme Power, Extreme Control and Extreme Fun in a relatively small footprint – small enough for most 1:18th scale vehicles. The waterproof Micro X is suitable for 2WD or 4WD vehicles over 1.5 lbs and up to 2.25 lbs. The Micro X and a “mighty-mite” 0808 brushless motors is simply an awesome brushless power system upgrade for Mini-LST, Half-Eight, Mini-Quake and Spyder vehicles. In following with the other Mamba X Series ESCs, the new Mamba Micro X features even more extreme performance and capabilities than the model it replaces. The new Micro X receives a heavy-duty BEC (battery eliminator circuit) to handle today’s high-draw digital servos and also features a programmable Auxiliary Wire (AUX) that allows the user to make “on-the-go” adjustments to several settings, such as torque control and max throttle, directly from a compatible transmitter. This allows you to fine-tune the performance of the Micro X to meet changing driving conditions.

Sensor Support :
New to the Micro X is the ability to run sensored brushless motors (with the purchase of an optional Sensor Harness). Now, a whole new group of R/C enthusiasts will be able to enjoy the power, control and fun of a Castle power system in your vehicle. The Micro X is cable of running on 2S up to 3S LiPo power with a highly-efficient heat sink design to keep you running cool, even when pushing it hard in mud, sand and other heavy power applications.

Castle Link: Industry-Leading Software Functions and Tuning:
Small but mighty, the Micro X can be “custom tuned” via Castle’s industry-leading Castle Link software. This allows access to the full programming suite of adjustable settings so that enthusiasts can tune and tweak the performance of their Micro X-equipped vehicle to their preference.

Castle Link adjustable settings for the new Micro X include:

  • Throttle
  • Braking Curve
  • Drag Brake
  • Auto LiPo Cutoff
  • Punch Control
  • Reverse Type
  • Motor Type

    *Not intended for operation while submerged in liquid. If unit is operated in wet conditions, rinse with fresh water to remove dirt or corrosives, then fully dry unit.


    • Input Voltage Range:
      MIN: 2S LiPo; MAX: 3S LiPo, 12.6V
    • BEC Specifications:
      Adjustable: 5.5V or 7.5V (2A Peak), default 5.5V
    • Operating Environment:
      Waterproof* design allows for use in nearly any environment.
    • Brake:
    • Reversible:
      Yes - with lockout
    • On/Off Switch:
      Yes, waterproof
    • Size:
      1.61”in x 0.75”in x 1.10” inches (4.1 x 1.9 x 2.8 cm)
    • Weight:
      1.20 oz (34.01 g)
    • Items Needed for Operation:
      Battery Connector required, Traxxas HC, WSDeans Ultra Plug, or 4mm Castle Connectors are recommended.
    • Product Use Statements:
      *Applying voltages higher than 12.6 volts will cause irreparable damage to your controller, voiding your warranty.
      *Recommended battery capacity for 1:18th scale vehicles is 1500mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas Power Cell).
      *The Mamba Micro X has 3.5mm bullet connectors on the motor wires and the battery input wires are bare. You must add the connector of your choice to the battery leads. We recommend a high current connector rated for at least 40 amps.
    • Application Guidelines:
      1:18th scale RC hobby vehicles weighing up to 2.25lbs.

    Motor Specs:

    • Motor Size: 1.5” x .79”
    • Shaft: .08” (2mm)
    • Weight: 1.8oz (50g)
    • Mounting Hole: 1/2”, 14MM, 5/8”
    • Maximum Operating Temperature: 180 F (82 C)
    • Maximum Input Voltage: 3S LiPo (2S LiPo max for 8200kv)
    • Connectors: 3.5mm gold connectors