Polarity Protection: Yes. it is not a typo. No more "oops" moment. The chip-type magnetic encoder inside the motor guarantees consistency between three phases’ signals and always outputs the pure and precise signals indicating the rotor position.

The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather & track conditions without any issue of damage caused to the system from water or dust. Damage to the vehicle caused by water, mud, or conditions should be monitored closely when running in muddy, wet, or adverse conditions.

Intelligent torque output & speed closed-loop control for easy control, and consistent motor RPM under all loads.

The adjustable drag brake & drag brake rate control with the maximum drag brake of up to 200% (that’s near twice the drag brake of standard brushless power systems) can provide

Unprecedented parking capacity on slopes, with no jerky stops.

The innovative built-in Bluetooth connectivity. allows users to read ESC data or update ESC firmware via a smartphone (installed with the HW LINK app).

The motor with 4 poles & 12 magnets, featuring Hobbywing’s “staggered pole” patent has zero cogging effect & torque ripple. It can work smoothly at low speeds. This greatly improves

Maneuverability of rock crawlers at low speeds.

The new sensor harness, which features the plug-and-screw design, has a silicone O ring inside. The new design & O ring not only provide a firm connection between motor and ESC but solve “waterproof” challenge for sensor ports.

Advanced and secure electronic switch features a waterproof, dust-proof and shock-resistant design.

Multiple protections: low-voltage cutoff, thermal, fail-safe (throttle signal loss), motor lock-up, and overcurrent.

Cont./Peak Current 60A/360A

Input Voltage 2-3S LiPo, 6-9S NiMh

BEC Output 6V/7.4V Switchable, Continuous Current of 4A (Switch-mode)

Input wires Red-Black-12AWG-200mm

Input connector XT60

Programming Port Built-in Bluetooth

Firmware OTA upgradable

Size / Weight 47.4 x 36.2 x 24.6mm / 82g


XERUN AXE 540 Motor-Specification:

1/10-1/8th FOC brushless motor (Patented)

Waterproof,

Motor Diameter: 36.0(1.42in)

Length (mm): 48.8mm(1.92in)

Shaft Diameter: 3.175(0.125in)

Pole: 4