 |
 |
 |
|
B6AC+ Specs:
Operating voltage range: AC 100-240V, DC 11.0~18.0 Volt
Circuit power: Max. charge power 50W
Charge current range: 0.1~5.0A
Discharge current range: 0.1-1.0A
Current drain for balancing Li-po: 300 mAh/cell
NiCd/NiMH battery cell count: 1-15 cells
Li-ion/Polymer cell count: 1-6 series
Pb battery voltage: 2-20V
Dual Power multi-use charger for 1-6 Li-Ion/LiPo/LiFe cells, 1-15 NiCd/NiMH cells, and Pb 2-20V. Includes adapters for "Deans" style plugs, JST, Rx pack, glow plug lighter, and alligator clips. Balance plugs on end of unit are JST-XH type and are compatible with many Asian battery packs.
B6AC+ Charger Includes:
*Internal independent lithium battery balancer: Employs an individual-cell-voltage balancer to maintain your pack in balance while charging.
*Balance individual cells during discharge: During the discharge process, B6-Pro can monitor and balance each cell of the pack individually. An error message will sound and the process will end automatically if the voltage of any single cell is abnormal.
*Fast and Storage mode charging: "Fast" charge will fully charge a lipo battery in the shortest time. "Store" setting will charge the battery at approXImately a 50% charge for long term storage. This prolongs the useful life of the battery pack.
*Charges various types of LiPo cells: Includes charging programs for LiFe (A123), Li-Ion, and LiPo battery types. Data store/load: Up to 5 batteries' data can be stored for easy programming.
*Cyclic charging/discharging: 1-5 cycles of either charge>discharge or discharge>charge is possible.
|
|
|
 |
|
 |
|
