 |
 |
 |
|
The Eiger mountain towers amongst the giants of the Swiss Alps topping some 13,000 plus feet. Let Novak's Eiger Crawling Brush ESC power you to mountain-high adventures as well! The tiny Eiger is packed with all the features you need, and is easier to use and more adjustable than any ESC in its class. Tuning on the rocks is as easy as 1-2-3. No programmers or wires to fuss with! With four on-board adjustments, the Novak Eiger Crawling ESC can be customized to suit any type of crawling. HEAVY-DUTY BEC
The Eiger is compatible with 2S LiPo packs and has a built-in, heavy-duty 2-amp BEC that will power high torque single servo setups with ease. The Eiger is also compatible with 3S LiPo packs! Simply install an external BEC and enjoy the wheel-spinning good times of 11.1 volts! Yee Haw! NOT JUST FOR CRAWLING
The Eiger ESC comes ready to crawl, and will default to the normal rock crawling settings: forward and reverse with high-power drag brake. Not only can you adjust the power of your Drag/Hill Brakes via the simple on-board programming, but you can turn them off completely. This will set the speed control in normal "Basher" mode with forward, brake, and reverse operation -just like a regular, non-crawling ESC! It's the best of both worlds. Crawling and bashing! EIGER CRAWLER BRUSH ESC FEATURES
Designed especially for the demands of crawling vehicles to maneuver over the toughest terrain, and also works great for non-crawling applications Compact and lightweight design Compatible with Novak Terra Claw, Rock Star and other 540-size & 380-size brush motors 4 adjustable parameters: Brake Power/Throttle Mode (5 settings), Dead Band (5 settings), Drive Frequency (5 settings), and Voltage Cut-Off Water-resistant case with silicone gasket seal to help keep out the elements Built-In Voltage Cut-Off Circuitry prevents damage to LiPo batteries (auto detects 2S or 3S) Built-In 6V output for optional accessory fan or other detail items such as running lights User friendly One-Touch programming interface with four multi-colored status LEDs to help personalize the speed control's settings Novak's One-Touch Set-Up for quick, easy transmitter set-up ESC's BECs are not created equal. The Eiger's 2A BEC will go toe-to-toe with many other higher rated units. Three ESCs in one-The Eiger & Eiger Pro have a non-crawling, Basher Mode and can be used in any 1/10Th, 1/12th, 1/16th, or 1/18th application with a 20T or higher brushed motor. Additionally, each ESC has a Servo Mode for forward and reverse directions (no brakes) that can be used for robotic applications. Built-in diagnostic temperature monitoring that lets you quickly check the ESC's operating temperature at any time Thermal Overload Protection circuitry to protect the ESC from overheating Gold-plated direct-solder wiring tabs for fleXIble soldering options Plug-and-Play-The Eiger is factory-wired with Tamiya battery plug & gold-plated Bullet motor plugs. Factory installed power capacitor User-replaceable input harness Meets RoHS compliance and includes 120-Day Warranty EIGER CRAWLER BRUSH SPECS
Motor Compatibility: Brush Fwd/Brk/Rev: F/Drag Brakes/R (crawling modes); F/B/R (basher mode); F/R (servo mode) Input Cells: 2-3S LiPo or 4-9 NiMH Size: 1.15" x 0.95" x 0.66" (29.0 x 24.3 x 16.8 mm) Weight (w/o wires): 0.64 oz. (18.1 g) On-Resistance : 0.00036 ohms (Eiger Pro) Motor Limit (540): 20T or higher (2S); 35T or higher (3S) brushed motor Motor Limit (380): Any 380-size brushed motor BEC: 6V DC / 2A Wire Size: 14G Super-Flex Copper-Strand Silicone Wire Battery/Motor Plug: Gold-plated Bullet motor plugs factory installed. Tamiya battery plug. Status LEDs : 4 (multi-colored)
|
|
|
 |
|
 |
|
