HACKER SAFE certified sites prevent over 99% of hacker crime.

  Home >

RPM Revo/Maxx Black Axle Carriers With Oversize Bearings (2)
RPM Revo/Maxx Black Axle Carriers With Oversize Bearings (2)
 
Fits Front Or Rear Of Revo, T-MaXX 3.3, And T-MaXX 2.5r.
Your Price: $27.95

Quantity in Stock:4


Product Code: RPM80582
Qty:

Description
 

Revo, T-Maxx 2.5R and 3.3 Axle Carriers

Includes oversized bearings, carriers, and set screws. Fits all versions of the Traxxas Revo.
These Axle carriers by RPM for the Traxxas Revo, T-Maxx 2.5R and the T-Maxx 3.3 have been painstakingly redesigned to improve the durability, strength, and reliability of these much-abused parts. Check out this list of features built into each set of these RPM Axle carriers:

Axle Carriers:
*Stock replacement - no modifications are needed to bolt them in.
*Larger bearing bores accept RPM oversized bearings.
*Included in each kit are two 15mm bearings and two 21mm bearings.
*The wall thickness around the pillow-balls has been increased by 40% - eliminating split walls.
*More than 20% more material supports the pillow-balls, preventing them from pulling through.
*Redesigned reinforcing rib supporting the tie rod mount.
*Redesigned boot lock tabs making removal of the silicone boots easier.
*Press-fit bearings in the carrier means reduced movement of the Axle in the carrier.

Oversized Bearings:
*Outer bearings are 6x15x5mm (stock is 6x12x4mm).
*Inner bearings are 12x21x5mm (stock is 12x18x4mm).
*Wider bearings create an additional 2mm of contact with the Axle for smoother, longer running performance.

Stock vs. RPM Bearing Comparison
*3mm larger bearings have balls a full 33% larger than stock.
*The load ratings of RPM oversized bearings are double that of stock bearings and more than triple the fatigue rating of stock bearings as well.

Pillow-Ball Set Screws:
*Two-piece design uses aluminum and Delrin for the ultimate in holding power under extreme situations.
*Aluminum set screws reduce movement of the pillow-balls in the carrier.
*Delrin bushing caps have more than twice the contact area on the pillow-ball, keeping the pillow-balls locked in place at all times.

These RPM Axle carriers are sold with 1 Left and 1 right Axle carrier, 2 outer 15mm bearings, 2 inner 21mm bearings, 4 aluminum set screws, 4 Delrin bushing caps, and detailed instructions to help install them on your truck. Replacement bearing sets RPM80570 come with 2 inner 21mm bearings and 2 outer 15mm bearings.

Tech Note: Due to increased material to support the pillow balls from pulling through the carrier, RPM Revo Axle Carriers will not work in conjunction with 120-LT Long Travel rockers (Traxxas #5356).