|
|
|
|
Upon the release of the Traxxas 1/16th E-Revo, RPM immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With their guaranteed unbreakable material and a proven A-arm design based off of the larger, 1/10Th Revo A-arms, durability for the 1/16 E-Revo trucks has arrived. A significant problem RPM eliminated was slop in the suspension system. In some cases, they found as much as 1/32" of slop in the stock A-arms. That has been remedied with these RPM versions. These A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is the angled leading and trailing edges. RPM incorporates a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them. RPM front A-arms for the Traxxas 1/16th E-Revo are sold in sets of four - both upper and both lower a-arms. What's best is these A-arms, like all RPM molded products, are backed by RPMs industry-leading breakage warranty. If it breaks (under normal operating conditions), send it in and they will replace it.
|
|
|
|
|
|
|