HACKER SAFE certified sites prevent over 99% of hacker crime.

  Home > Vehicles > Cars > Off Road > Electric >

Tekno R/C EB48.4 Electric 1/8th 4WD Competition Buggy Kit
Tekno R/C EB48.4 Electric 1/8th 4WD Competition Buggy Kit
 
Alternative Views:


Our Price: $549.95

Quantity in Stock:(Out of Stock)

Product Code: TKR8000
Qty:

Description
 

TKR8000 – EB48.4 1/8th Competition Electric Buggy Kit


The EB48 has been carving out its place as the top 1/8th scale electric buggy for many years now. Through its history, we have continually improved on every aspect of performance and durability. The progression from the EB48 to the EB48.3 evolved through many significant changes, industry firsts, and also hundreds of fine adjustments. With the introduction of the EB48.4, we have once again raised the bar and improved on nearly every aspect of the buggy. This time it took the form of many fine adjustments, but the leap in performance is our most significant yet.


EB48.4 New Features:
  • New CNC 7075 Chassis with Improved Wear Characteristics
  • Revised Steering Geometry and Ackerman Plate
  • Bearing Supported Spindle/Carrier Design
  • Revised Wide Rear Pivot Suspension Geometry
  • Revised Ultra Efficient Drivetrain with New Universal Driveshafts
  • Revised Internal Gear Ratio for Improved Efficiency
  • CNC 4×1.9 Flat/Flat Delrin Pistons and CNC Delrin Guides
  • New CNC 7075 Aluminum Bleeder Shock Caps (emulsion, vented, non-vented)
  • New LF (low frequency) Shock Springs
  • New Fighter Jet Inspired Body Design
These changes feed into one desire to manufacture the best handling, most consistent, most durable, and highest value kit on the market. We’re confident that our wonderful customers will agree that we have delivered on these goals.



Specifications:
Length: 435mm (without wing)
Wheelbase: 323-335mm
Width: 306-310*mm (*optional hubs required)
Weight: 3200g (7.0lb) (RTR weight equipped w/ Tekin RX8, 500g battery, rx, etc)
Diff Ratio: F/R – 12/40t, Center – 44t
Battery tray dimensions: 50x148mm (2x2s or 1x4s config)



Needed to complete:
  • 2/3 channel radio/transmitter
  • 1/8 Scale ESC and motor
  • High torque steering servo
  • Pinion
  • 2 x 2s or 4s LiPo battery
  • 1/8th scale buggy tires, wheels & CA glue
  • Paint for body
  • Hex tools (1.5, 2.0, 2.5mm), pliers, other tools