![](/v/vspfiles/templates/210/images/DBox_Border_Left_Top.gif) |
![](/v/vspfiles/templates/210/images/clear1x1.gif) |
![](/v/vspfiles/templates/210/images/DBox_Border_Right_Top.gif) |
![](/v/vspfiles/templates/210/images/clear1x1.gif) |
Tekin RS Gen2 Spec/Redline Gen3 21.5T Brushless Motor/ESC Combo
The RS GEN2 SPEC is designed for Spec racing and offers professional performance at an affordable price. True ROAR Spec mode only, no timing or boost features are available. The RS SPEC brings racer-friendly tuning and flawless operation to the world of Spec racing.
Packed with new features, the RS GEN2 SPEC provides an EZ Access Port for HotWire communication and Datalogging capabilities in a small sized package. Rated for 13.5 turn motors and higher, the GEN2 is the perfect ESC for both experienced and new racers. Couple the RS GEN2 SPEC with a Redline GEN2 brushless motor for the ultimate package in Spec racing equipment.
Features:
- ROAR Spec Mode only, no Timing features
- Ultra-smooth and Precise Throttle and Braking Control
- Compatible with Sensored/Sensorless Brushless and Brushed Motors
- Easily Access Programming, Anywhere, Anytime
- Datalogging Capability
- EZ Access HotWire Programming Port
- HotWire PC Interface for Advanced Programming and Updating
- D2: Dual Drive Mode Technology
- On-Board Temperature Indicator
- HDAC: High Density Copper PCB's
- Sensor Plug for Precise Commutation with all Motors
- Gold-plated Solder Posts for Easy Wire Replacement
- Self Test Diagnostics and Factory Reset
- Pit Tune Mode
- DGF2: Digital Glitch Filtering V2
- QuickTune Programming
- One-Touch Radio Calibration
Programming Features:
- Drag Brake (13 steps)
- Brake / Reverse Strength (13 steps)
- Current Limiter (none + 12 steps)
- Neutral Width (13 steps)
- Adjustable Throttle and Brake Minimums
- Custom Throttle Curves
- Motor/Reverse Type: Brushless, Brushed, No Rev, Rev Delay
- Voltage Cutoffs (none, 2S, 3S, Custom)
- ROAR Race Spec "Blinky" Mode
- Extensive Tuning via Tekin HotWire PC Interface
Hotwire Programming Option* - Save, Load and Share custom ESC setup files*
- Save, Load and Share Data Log files*
*Requires HotWire Sold Separately
Specs:
- Controls: Forward/Brake/Reverse
- Input Voltage: 4-7 Cells, 2S Lipo
- BEC: 6.0v 3.7amps
- Motor Limit Brushless Mode: 13.5 Turn, 540 2-pole (36mm)
- Motor Limit Brushed Fwd Only Mode: 20 Turn Silver Can
- Motor Limit Brushed Fwd/Rev Mode: 20 Turn Silver Can
- Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
- Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
- Dimensions: 1.0 x 1.3 x .51in (25.4 x 33 x 12.9mm)
- Weight: .80oz / 22.5g
Motor Specs:
Tekin’s third generation motors are re-engineered from the ground up resulting in a smaller, lighter and faster sensored motor. On Road or Off, the new GEN3 handles the task in stride, delivering the smooth power across all RPMs that you’ve come to expect from a Tekin motor. Much more than a re-hash and new look, the GEN3 Redline Sensored Motor is now ready for any situation and able to create the speed you need to win.
Specs:
- Input Voltage: 2S - 3S lipo
- Weight: 158g / 5.6oz
- Shaft Dimensions: 3.2mm (1/8") x 15.3mm
- Motor Diameter: 35.85mm / 1.40"
- Motor Length: 48.5mm / 1.909"
- Bearing Dimensions: Front: 4 x 13 x 5mm / Rear: 1/8 x 3/8 x 5/32"
- Rotor Size: 12.5mm
Features:
- CNC Machined T 6061 Billet Aluminum Heat Sink Can
- Neodymium Sintered Magnet
- Precision Engineered for Maximum Energy Conversion
- High Purity Copper Windings Maximize Conductivity
- Low Resistance, High Power Solder Tabs
- Dual-Plug Sensor Wire Harness for all Sensored and Sensorless systems
- Anodized End-bell plates maximize corrosion and wear resistance
- High RPM precision bearings
- Rebuild-able Design
- Solder-less Sensor PCB replacement
- Adjustable Timing
|
|
![](/v/vspfiles/templates/210/images/clear1x1.gif) |
![](/v/vspfiles/templates/210/images/DBox_Border_Left_Bottom.gif) |
![](/v/vspfiles/templates/210/images/clear1x1.gif) |
![](/v/vspfiles/templates/210/images/DBox_Border_Right_Bottom.gif) |
![](/v/vspfiles/templates/210/images/clear1x1.gif)
|